Enabling safe movement through reliable threat detection
Enabling safe movement through reliable threat detection
Enabling safe movement through reliable threat detection
Enabling safe movement through reliable threat detection
Freedom of movement in contaminated environments depends on the ability to detect explosive threats early, consistently and under operational pressure. Sensor and detection systems provide the first critical layer of route and area security by identifying subsurface anomalies that may indicate mines, improvised explosive devices or other buried hazards.
GCS Sensor and Detection Systems are designed to support Route Clearance, route verification and IEDD-related tasks in military and governmental contexts, where detection must be integrated into mobile operations and decision-making under time constraints.
By combining vehicle‑mounted sensor technology with operational integration and system support, GCS enables safer movement and more predictable clearance operations in demanding environments.
Freedom of movement in contaminated environments depends on the ability to detect explosive threats early, consistently and under operational pressure. Sensor and detection systems provide the first critical layer of route and area security by identifying subsurface anomalies that may indicate mines, improvised explosive devices or other buried hazards.
GCS Sensor and Detection Systems are designed to support Route Clearance, route verification and IEDD-related tasks in military and governmental contexts, where detection must be integrated into mobile operations and decision-making under time constraints.
By combining vehicle‑mounted sensor technology with operational integration and system support, GCS enables safer movement and more predictable clearance operations in demanding environments.
Freedom of movement in contaminated environments depends on the ability to detect explosive threats early, consistently and under operational pressure. Sensor and detection systems provide the first critical layer of route and area security by identifying subsurface anomalies that may indicate mines, improvised explosive devices or other buried hazards.
GCS Sensor and Detection Systems are designed to support Route Clearance, route verification and IEDD-related tasks in military and governmental contexts, where detection must be integrated into mobile operations and decision-making under time constraints.
By combining vehicle‑mounted sensor technology with operational integration and system support, GCS enables safer movement and more predictable clearance operations in demanding environments.
Freedom of movement in contaminated environments depends on the ability to detect explosive threats early, consistently and under operational pressure. Sensor and detection systems provide the first critical layer of route and area security by identifying subsurface anomalies that may indicate mines, improvised explosive devices or other buried hazards.
GCS Sensor and Detection Systems are designed to support Route Clearance, route verification and IEDD-related tasks in military and governmental contexts, where detection must be integrated into mobile operations and decision-making under time constraints.
By combining vehicle‑mounted sensor technology with operational integration and system support, GCS enables safer movement and more predictable clearance operations in demanding environments.
GCS offers a focused portfolio of sensor and detection systems developed for Route Clearance and route verification tasks.
Each system is designed to be integrated into operational vehicles and mission workflows, supporting detection and assessment under real‑world conditions. The portfolio reflects the need for adaptable detection capabilities across varying threat types, ground conditions and operational tempos.
GCS offers a focused portfolio of sensor and detection systems developed for Route Clearance and route verification tasks.
Each system is designed to be integrated into operational vehicles and mission workflows, supporting detection and assessment under real‑world conditions. The portfolio reflects the need for adaptable detection capabilities across varying threat types, ground conditions and operational tempos.
GCS offers a focused portfolio of sensor and detection systems developed for Route Clearance and route verification tasks.
Each system is designed to be integrated into operational vehicles and mission workflows, supporting detection and assessment under real‑world conditions. The portfolio reflects the need for adaptable detection capabilities across varying threat types, ground conditions and operational tempos.
GCS offers a focused portfolio of sensor and detection systems developed for Route Clearance and route verification tasks.
Each system is designed to be integrated into operational vehicles and mission workflows, supporting detection and assessment under real‑world conditions. The portfolio reflects the need for adaptable detection capabilities across varying threat types, ground conditions and operational tempos.
Detection System (DS)
The Detection System (DS) is a vehicle‑based ground‑penetrating radar solution developed to support route clearance and route verification tasks. It is intended for missions where rapid, repeatable scanning of supply routes is required to reduce reliance on manual inspection and increase operator safety.
The system is mounted on or transported by a carrier vehicle and scans the ground continuously for subsurface anomalies that may indicate explosive threats. When a potential hazard is detected, the vehicle can be halted to allow further assessment and follow‑on procedures by EOD personnel.
DS is designed for use in post‑conflict and stabilisation environments, particularly on main supply routes that require frequent verification under time pressure.
Multi‑Sensor Detection System (MDS) – under development
The Multi‑Sensor Detection System (MDS) is an upcoming capability that builds on the detection concept by combining multiple sensor technologies within a single system.
MDS is intended to improve detection performance across a wider range of threat types and ground conditions by correlating data from different sensing methods. This approach reflects the operational reality that no single sensor technology can reliably detect all explosive threats.
The system is being developed for route clearance and IEDD‑related missions where higher detection confidence and adaptability are required. MDS is currently under development and will be presented at a later stage.
System configuration depends on area size, threat profile and regulatory constraints.
Detection System (DS)
The Detection System (DS) is a vehicle‑based ground‑penetrating radar solution developed to support route clearance and route verification tasks. It is intended for missions where rapid, repeatable scanning of supply routes is required to reduce reliance on manual inspection and increase operator safety.
The system is mounted on or transported by a carrier vehicle and scans the ground continuously for subsurface anomalies that may indicate explosive threats. When a potential hazard is detected, the vehicle can be halted to allow further assessment and follow‑on procedures by EOD personnel.
DS is designed for use in post‑conflict and stabilisation environments, particularly on main supply routes that require frequent verification under time pressure.
Multi‑Sensor Detection System (MDS) – under development
The Multi‑Sensor Detection System (MDS) is an upcoming capability that builds on the detection concept by combining multiple sensor technologies within a single system.
MDS is intended to improve detection performance across a wider range of threat types and ground conditions by correlating data from different sensing methods. This approach reflects the operational reality that no single sensor technology can reliably detect all explosive threats.
The system is being developed for route clearance and IEDD‑related missions where higher detection confidence and adaptability are required. MDS is currently under development and will be presented at a later stage.
System configuration depends on area size, threat profile and regulatory constraints.
Detection System (DS)
The Detection System (DS) is a vehicle‑based ground‑penetrating radar solution developed to support route clearance and route verification tasks. It is intended for missions where rapid, repeatable scanning of supply routes is required to reduce reliance on manual inspection and increase operator safety.
The system is mounted on or transported by a carrier vehicle and scans the ground continuously for subsurface anomalies that may indicate explosive threats. When a potential hazard is detected, the vehicle can be halted to allow further assessment and follow‑on procedures by EOD personnel.
DS is designed for use in post‑conflict and stabilisation environments, particularly on main supply routes that require frequent verification under time pressure.
Multi‑Sensor Detection System (MDS) – under development
The Multi‑Sensor Detection System (MDS) is an upcoming capability that builds on the detection concept by combining multiple sensor technologies within a single system.
MDS is intended to improve detection performance across a wider range of threat types and ground conditions by correlating data from different sensing methods. This approach reflects the operational reality that no single sensor technology can reliably detect all explosive threats.
The system is being developed for route clearance and IEDD‑related missions where higher detection confidence and adaptability are required. MDS is currently under development and will be presented at a later stage.
System configuration depends on area size, threat profile and regulatory constraints.
Detection System (DS)
The Detection System (DS) is a vehicle‑based ground‑penetrating radar solution developed to support route clearance and route verification tasks. It is intended for missions where rapid, repeatable scanning of supply routes is required to reduce reliance on manual inspection and increase operator safety.
The system is mounted on or transported by a carrier vehicle and scans the ground continuously for subsurface anomalies that may indicate explosive threats. When a potential hazard is detected, the vehicle can be halted to allow further assessment and follow‑on procedures by EOD personnel.
DS is designed for use in post‑conflict and stabilisation environments, particularly on main supply routes that require frequent verification under time pressure.
Multi‑Sensor Detection System (MDS) – under development
The Multi‑Sensor Detection System (MDS) is an upcoming capability that builds on the detection concept by combining multiple sensor technologies within a single system.
MDS is intended to improve detection performance across a wider range of threat types and ground conditions by correlating data from different sensing methods. This approach reflects the operational reality that no single sensor technology can reliably detect all explosive threats.
The system is being developed for route clearance and IEDD‑related missions where higher detection confidence and adaptability are required. MDS is currently under development and will be presented at a later stage.
System configuration depends on area size, threat profile and regulatory constraints.
Sensor and Detection Systems are one element of GCS’ broader explosive‑threat mitigation portfolio. Depending on the mission, the Sensor and Detection Systems can be combined with both in‑house and third-party products and services such as:
Sensor and Detection Systems are one element of GCS’ broader explosive‑threat mitigation portfolio. Depending on the mission, the Sensor and Detection Systems can be combined with both in‑house and third-party products and services such as:
Sensor and Detection Systems are one element of GCS’ broader explosive‑threat mitigation portfolio. Depending on the mission, the Sensor and Detection Systems can be combined with both in‑house and third-party products and services such as:
Sensor and Detection Systems are one element of GCS’ broader explosive‑threat mitigation portfolio. Depending on the mission, the Sensor and Detection Systems can be combined with both in‑house and third-party products and services such as:
Operational experience from the field, across contexts and missions.
Operational experience from the field, across contexts and missions.
Operational experience from the field, across contexts and missions.
Operational experience from the field, across contexts and missions.
Configure the right system for your task
GCS helps define the right platform, attachments, sensors and support package based on threat type, terrain and mission requirements.
Configure the right system for your task
GCS helps define the right platform, attachments, sensors and support package based on threat type, terrain and mission requirements.
Configure the right system for your task
GCS helps define the right platform, attachments, sensors and support package based on threat type, terrain and mission requirements.
Configure the right system for your task
GCS helps define the right platform, attachments, sensors and support package based on threat type, terrain and mission requirements.